Time Lapse Intervalometer


Time Lapse Intervalometer

218,75
Le prix n'inclut pas la TVA ni la livraison .

THE CAMDO TIME LAPSE INTERVALOMETER FOR GOPRO CAMERAS IS A PROGRAMMABLE INTERVALOMETER (imagerie intermittente) DESIGNED FOR TAKING LONG TIME LAPSE SEQUENCES. THE INTERVALOMETER ALLOWS THE CAMERA TO BE TURNED OFF BETWEEN TRIGGERS TO CONSERVE POWER.

Application

We now have limited stock of the Naked Time Lapse Intervalometer (TL-004N) which is suitable for older GoPro cameras. If you are using a HERO3+ or HERO4 cameras, we suggest purchasing the all-new Blink, which has the same features but has more programming flexibility and is configurable using a simple Web Interface and more!

The Intervalometer is a small high quality circuit board that plugs into the HERO Port on the back of the GoPro camera. The Intervalometer is small enough to fit inside the GoPro HERO3 Frame Mount or the extended back doors provided with the GoPro accessories such as the GoPro LCD BacPac or the GoPro Battery BacPac.

In the time lapse operating mode, the Intervalometer can be programmed to turn the camera on at a regularly spaced interval so that the GoPro can capture an image or video before turning the camera off to maximize the battery life. In most cases, the camera will take about 700 images on a single battery charge (2,000 on the HERO2). These images can be spread over hours, days or even weeks without recharging the battery.

The Intervalometer has multiple operating settings and input/output pins that allow for the board to be applicable to various custom solutions. Read more about the Intervalometer's other features for advanced applications here.

Note that the Intervalometer is only capable of turning on the HERO3 Black and newer GoPro cameras but not off. Functionality on these cameras is achieved through the use of our scripts saved to the SD card. The scripts are normally used to take a picture or record for a set amount of time before turning the camera off so that it can be re-triggered by the controller. (Blink can control the power, mode, and shutter functions of the HERO3+ and HERO4 cameras without scripts)

PROGRAMMING FLEXIBILITY

  • Programmable delayed start
  • Automatic Start mode turns on the camera a few seconds after remote power up (all compatible cameras except the HERO4)
  • Repeat cycle or continuous operation once started
  • Programmable repeat cycle from 35 seconds to one week or more
  • Programmable Input/Output pins (See Advanced Application Notes)

 

NO ADDITIONAL BATTERY REQUIRED

  • The Intervalometer uses the camera’s battery. In standby it uses very little power (similar to a watch) and does not reduce the battery life.

 

SMALL FORM FACTOR

  • While typically used with our Outdoor Enclosures to also house extra battery packs, it will also fit inside the extended backdoors included in the GoPro Back Door Kit that are designed to fit GoPro BacPac accessories.Compatible with the GoPro camera with a HERO Port connector on the back of the camera (with the exception of the HERO3 Silver).
  •  

    Camera

    Compatibility ( Y / N )

    HERO5

    HERO5 Session

    HERO4 Black

    ✔*

    HERO4 Silver

    ✔*

    HERO4 Session

    HERO (2014)

    HERO3+ Black

    HERO3+ Silver

    HERO3 Black

    HERO3 Silver

    HERO3 White

    HERO2

    HERO

    * HERO4 compatibility can only be achieved through a custom firmware modification to the camera. The firmware modification is explained in detail here.

     

    With the current GoPro firmware, the Intervalometer can turn the HERO3 Black, HERO3+, and HERO4 cameras on, but it cannot turn them off. The camera must be programmed to turn off after taking a photo or shooting a video of the desired length using scripts which are installed on the SD card. This allows for considerable flexibility in deciding what the camera will do when triggered by the Intervalometer. Sample HERO3+ and HERO3 Black scripts can be seen here. HERO4 scripts are structured differently, and their feature set can be seen here.

     

    Scripts are not required for HERO2 or HERO3 White cameras.

Support

Application

General support can be found on our Support pages here.

Average GoPro recording times in each video setting

Also read the FAQ's tab for more information.

Cam-do, Camdo, MDC, Marine Distribution & Consulting, France, Time Lapse, Time Lapse Intervalometer, GoPro, Hero, cameraHERO3 Black, HERO3, HERO4, Hero5 vidéo accélérée, vidéo en accéléré, intervalomètre

Sélection: Time Lapse Intervalometer

Référence Version Statut Prix
Camdo4-0001 Carte / board
218,75 *
Camdo4-0002 Acrylique
218,75 *
* Le prix n'inclut pas la TVA ni la livraison .

Accessoires

Produit Remarque Statut Prix
Deep Deep
610,00 *

Fiche technique du produit

Lampe de poche LED sous-marine Lampe de poche LED sous-marine
232,50 *
Underwater Wifi Pro Pack Underwater Wifi Pro Pack
1 065,00 *
* Le prix n'inclut pas la TVA ni la livraison .
Afficher les propriétés de l'accessoire

Nous vous recommandons aussi

BlinkX by Cam-Do
287,85 *
* Le prix n'inclut pas la TVA ni la livraison .

Parcourir également ces catégories : Boutique, Cam-Do, Your source for marine supplies Marine Distribution & Consulting