Your basket is empty.

T200 Spare (with penetrator and short cable)

Not in stock

165.83 €

Price plus VAT, plus delivery

Description

Product Description

This T200 comes with a slightly shorter cable and a pre-installed cable penetrator and is a drop-in replacement for the thrusters on the BlueROV2.

If you’re looking for the normal T200 you can find it here. Also, remember that this thruster needs an electronics speed controller (ESC), like the BASIC ESC, to operate.

1 x T200 Thruster w/ Cable Penetrator
1 x Cable Penetrator Nut
1 x Cable Penetrator O-ring
1 x CCW Propeller (CW is already installed on the thruster)

Technical Details

Specifications

Parameter	Value
Performance
Full Throttle FWD/REV Thrust @ Nominal (16 V)	5.25 / 4.1 kg f	11.6 / 9.0 lb f
Full Throttle FWD/REV Thrust @ Maximum (20 V)	6.7 / 5.05 kg f	14.8 / 11.1 lb f
Minimum Thrust	0.02 kg f*	0.05 lb f*
Electrical
Operating Voltage	7-20 volts
Full Throttle Current @ Nominal (16 V)	24 Amps
Full Throttle Current @ Maximum (20 V)	32 Amps
Full Throttle Power @ Nominal (16 V)	390 Watts
Full Throttle Power @ Maximum (20 V)	645 Watts
Physical
Length	113 mm	4.45 in
Diameter	100 mm	3.9 in
Weight in Air (with 1m cable)	0.76 lb	344 g
Weight in Water (with 1m cable)	0.34 lb	156 g
Propeller Diameter	76 mm	3.0 in
Mounting Hole Threads	M3 x 0.5
Mounting Hole Spacing	19 mm	0.75 in
Cable Length	0.71 m	28 in
Cable Diameter	6.3 mm	0.25 in

Note that nominal operation at 12-16 V is recommended for the best balance of thrust and efficiency, though operation at up to 20 V is allowable. Exceeding 20 V is not within the rating and not recommended, please see here for more information.

For more detailed performance specifications, including thrust, RPM, power, and efficiency at various throttle levels and supply voltages from 10-20 V, please see the performance charts below.

T200, Thruster, Cable penetrator, penetrator, basic esc, BlueROV2, ROVs, MDC, palanquee.fr, ROV.