Lumen Subsea Light for ROV/AUV (New R2 Version)


Lumen Subsea Light for ROV/AUV (New R2 Version)

Not in stock

95.00
Price plus VAT, plus delivery


Description

The Lumen Subsea Light is a blindingly bright LED light for use on ROVs, AUVs, and other subsea applications. We designed this light specifically for this purpose and it has a few neat features:

  • Fully dimmable control using a PWM servo signal (1100-1900 μs)
  • Simple on/off control with no signal needed
  • Daisy-chainable to connect multiple lights from a single connection
  • Automatic, smart over-temperature compensation for maximum light output and safety in air
  • New in R2: Built-in mounting holes on the side of the case (M3 thread)
  • New in R2: Exponential brightness control with much lower minimum brightness output
  • New in R2: 500m depth rating

Using a high-efficiency Cree XLamp MK-R LED, the light outputs over 1500 lumens at 15 Watts – brighter than most car headlights! It has a 135 degree beam angle for wide illumination in front of an ROV. The color temperature is 6200K, similar to most dive lights and ROV lights.

In addition to really high brightness, the Lumen R2 is designed for very low brightness output, which is important to be able to illuminate the scene without washing out the colors or brightness. An exponential brightness curve makes it intuitive to use effectively.

Illuminiation Lumens Subsea light

It’s housed in a rugged hard-anodized aluminum enclosure with two cable penetrators at the rear, allowing it to go to a depth of 500m. By default, the second cable penetrator is blank, but the light comes with a second penetrator to allow a second light to be connected to the first (daisy-chaining). That means you only need one cable coming from the main watertight enclosure to control multiple lights!

The specially designed injection molded acrylic lens ensures a consistent beam angle in both air and water. The case has a built-in mounting bracket with two M3 threaded holes for mounting to your vehicle.

For those who want to use the light in other applications, like scuba diving, the light can be operated without a PWM signal. Just connect the yellow signal wire to the power wire and it will turn on! A switch can be used here to make this even more convenient.

The light operates on 10-48V inputs and can accept PWM signals from 3-48V! It is compatible with many common boards like the Arduino, Raspberry Pi, and PixHawk. The case warms up to a comfortable 55°C (131°F) when operated in air and stays much cooler in water.

Note: We recommend that you don’t look directly into this light to avoid any damage to your eyes!

Contents

  • 1 x Lumen Subsea Light
  • 2 x Stainless steel M3 mounting screws
  • 1 x Lumen Cable Penetrator for 4mm Cable
  • 1 x O-ring for Cable Penetrator

 

Dimensions:

Dimensions Lumen R2

Resources

  •  

 

Lumen LED LightFranceBlue RoboticsMarine Distribution & Consulting

Accessories

Product Note Status Price
Blue ROV2 by MDC Blue ROV2 by MDC
7,999.83 € *

Product data sheet

T200 Thruster T200 Thruster
179.00 € *

Product data sheet

Raspberry Pi Camera Module v2 w/ Wide Angle Lens Raspberry Pi Camera Module v2 w/ Wide Angle Lens
79.99 € *
Angle Grinder Angle Grinder
from 1,950.00 € *

Product data sheet

M100 Brushless Motor M100 Brushless Motor
62.08 € *

Product data sheet

Bar100 High-Resolution 1000m Depth/Pressure Sensor Bar100 High-Resolution 1000m Depth/Pressure Sensor
240.29 € *
Low-Light HD USB Camera Low-Light HD USB Camera
108.33 € *
Switch (UW application) Switch (UW application)
20.69 € *

Product data sheet

* Prices plus VAT, plus delivery
Display accessory details

We also recommend

BlueROV2 (kit)
from 3,233.33 *
* Prices plus VAT, plus delivery

Browse these categories as well: For Divers, ROV s, LED, Webstore, Blue Robotics, Your source for marine supplies Marine Distribution & Consulting