MDC für: BlueRobotics, Blueprint Lab, Blueprint Subsea, Bluetrail Engineering, Broco, Ceweld,
GPA Seabots, Impact Subsea, Kraken Power, Nemo, Paralenz, Seafloor System, Waterlinked...
Willkommen Webstore Fathom Spool 150
The Fathom Spool is a rugged and easy to use spool that simplifies tether storage and management for your BlueROV2 and / or Blue Rov2 by MDC! Full IP67 water resistance, 8-wire slip-ring, and integrated quick connectors make it tough enough to use at almost any dive site while remaining easy to transport.
Does not include tether! A Fathom-X Tether Interface (FXTI)topside box is required for use, as well as a tether with an installed Binder 770 connector.
The Fathom Spool is a rugged and easy to use tether spool for the Fathom and Fathom Slim ROV tethers. An integrated slip ring provides connections for up to eight tether wires, even while the spool is rotating. It’s quick to set up and use in a variety of conditions. Full IP67 water resistance means it is splash-proof, and a reversible locking handle makes it easy to transport.
Check out the new product video for the Spool, FXTI, and Fathom Tether:
The crank handle can be removed with a single thumb screw, allowing it to be flipped around and reinstalled for easy transportation and locking of the spool.
The Fathom Spool comes as a partially-assembled kit with some simple assembly required. It has a Binder 770 connector on both the inside and outside of the spool so that to install the tether, you just plug it into the inner Binder 770 connector, attach a few restraints, and start spooling! An included 8 meter (26 ft) extension cable provides a connection from the outer connector on the spool to your FXTI and computer.
The Fathom Spool is available in two configurations- a standard width version capable of storing up to 150m of Fathom ROV tether, and a double wide large version capable of storing up to 300m.
Does not include tether! A Fathom-X Tether Interface (FXTI) topside box is required for use, as well as a tether with an installed Binder 770 connector.
Contents
- 1 x Fathom Spool partially assembled kit
- 1 x 8 meter extension cable with Binder 770 plugs
Specifications
Specification Table
| Physical | ||
|---|---|---|
| Length | 366 mm | 14.41 in |
| Width (Standard) | 350 mm | 13.78 in |
| Width (Large) | 534 mm | 21.02 in |
| Height | 349 mm | 13.74 in |
| Weight (Standard) | 2.22Kg | 4.89 lbs |
| Weight (Large) | 2.89 Kg | 6.38 lbs |
| Maximum Fathom Tether Length (Standard) | 150 m | 492 ft |
| Maximum Fathom Slim Tether Length (Standard) | 540 m | 1772 ft |
| Maximum Fathom Tether Length (Large) | 300 m | 984 ft |
| Maximum Fathom Slim Tether Length (Large) | 1080 m | 3543 ft |
| Dust and Water Resistance | IP67 | |
| Included Cable to FXTI Topside Box | 8 m | 26.25 ft |
2D Drawings
Fathom Spool (Standard)
Fathom Spool (Large)
Resources
Blue Robotics, Marine Distribution & Consulting, MDC, Deutschland, Tether spool, Fathom Spool, winch, umbilical, slip ring, Blue ROV2, Kabelwinde, Umbilical, Fathom Spool150
Zubehör
| Produkt | Hinweis | Status | Preis | |
|---|---|---|---|---|
|
|
7'999.83 € | ||
|
ab 3'233.33 € | |||
|
157.62 € | |||
|
|
159.55 € | ||
|
||||
|
12.50 € | |||
|
4.25 € | |||
| Details zum Zubehör anzeigen | ||||
BlueROV2 von MDC
BlueROV2 (kit)
Fathom-X Tether Interface (FXTI)
Fathom-X Tether-Schnittstellenkartenset
Thruster Kabel
Binder 770 Steckverbinder
M10 Kabeldurchführung 6mmZu diesem Produkt empfehlen wir
 |
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
Auch diese Kategorien durchsuchen: Webstore, Blue Robotics, Tether / Kabel / Umbilical, Your source for marine supplies Marine Distribution & Consulting
